tangential displacement

Tangential motion along grinding wheel face is achieved by the length feed of the lathe working table, and normal motion jiggle inputting along grinding wheel face is achieved by the minute displacement mechanism of the dressing tool.

其中沿砂轮表面切向运动由机床工作台的纵向进给运动完成，而沿砂轮表面法向运动的微进给运动由修整器的微位移机构来实现。

The imperfect interface with a continuous normal displacement and a jumped tangential displacement is called a sliding interface.

只有切线方向的位移间断，而法线方向位移连续的弱界面称之为滑动界面。

The tangential displacement of the dam was not a random variable.

该拱坝的切向位移并非随机值，有其固有规律性。

The theoretical study for deformation of the flexible roller is made, the basic equations of the flexible roller is infered and the accurate calculation formulas for radial displacement ω and tangential displacement v are obtained.

对柔性滚子的变形进行理论研究，推导出柔性滚子的基本方程，并得出柔性滚子径向位移ω和切向位移V的精确计算公式。

Through analyzing tangential strain of three areas, it found out that neutral layer of strain move entad, but the displacement is not equal in each radial section.

在对三个区域的切向应变作了较为详细的分析讨论后，提出了应变中性层虽向内移动，但其内移量在各径向剖面内是不相等的这一说法。

The core technologies of this system are virtual calibration technology, dynamic tangential displacement measurement method and calculation method for system.

本系统的核心技术为虚拟标尺技术、切向位移偏差的光电测量技术以及信号处理技术。

The tangential displacement in rotating parts is main cause for overprint error.

印刷机滚筒表面各点的切向位移偏差是套印误差产生的主要原因。

The real-time monitoring system is designed for the measurement of the tangential displacement on the high-speed rotating parts.

论文研究了一种高速旋转滚筒表面切向位移偏差的实时监测系统。

The results showed that no TTS was observed under radial fretting condition. The tangential stress and displacement of the contact surface were the factors controlling the initiation of TTS, which supported that the formation of TTS was characterized by plastic deformation.

结果表明，TTS形成的主要控制因素是表面切应力和切向位移，TTS形成过程呈现塑性变形特征；

According to the theory that the bolt and the joint plane have the same distortion, the optimal anchoring angle and distortion angle are discussed, which are following with the changes of the tangential joint displacement and joint friction angle.

本文从理论分析出发，以锚杆和节理面共同变形为基础，探讨了锚杆最优锚固角和变形角随节理切向位移和节理摩擦角变化的规律。

During cutting gear sectors on this machine, the cutter performs vertical reciprocating motion only, while the workpiece ( gear sector) performs both rotary motion and variable speed tangential displacement, i. e. the cutting is performed by variable speed generating motion.

该机床在切削齿扇时，梳刀只作上下往复运动，工件（齿扇）既作圆周运动又作变速切向移动，即在变速范成运动中完成加工的。

The amending tangential displacement method is put forward toward the amend-ing normal displacement of stick contact to prevent the inset on the surface of a mixed ele-ment of displacement and force of Coulomb friction contact.

针对Coulomb摩擦接触问题的位移-力混合接触单元，为了防止接触面嵌入量太大，对于粘接状态在修正接触边界法向位移的同时，提出了一种修正切向位移的方法；

The method is based on the following concepts: ( 1) semi-bending moment theory combined with boundary effect theory of the cone-cylinder Junction ( 2) the minimun potential energy principle with the tangential displacement as the fundamental variable.

该方法的基本思想是：（1）联合运用半弯矩理论和结合边附近边界效应理论；（2）利用以切向位移作为基本未知数的最小势能原理。

It was validated that the relationship between the side resistance of piles and the difference of tangential displacement between two sides of the pile-soil interface could be expressed by hyperbola.

验证了桩侧阻力与接触面两侧切向位移差之间关系可以用双曲线表示。